Re: acceleration noise found! how to fix?? *heat stove*
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: acceleration noise found! how to fix?? *heat stove*



I think that www.pearce-design.com now has new manifold heat stoves 
available. I think they are made of stainless this time too. 

Adam Price



--- In dmcnews@xxxx, "tmpintnl" <tobyp@xxxx> wrote:
> Andy - It sounds like you are talking about the "heat stove" that 
> supplies hot air to the intake for cold start up. There was quite 
a 
> bit of chatter on the list about this part ... apparently it can no 
> longer be found. Somebody who is handy with "tin work" could 
> probably patch it back together, but you would have to get it off 
> first. The rusty studs, etc. could be a problem. You'll have to 
> decide how deep you want to go, considering the potential 
challenges 
> with sheared off studs, etc. There was also much talk on the List 
> about getting the manifolds off, so there might be some good ideas 
in 
> that thread. Good luck.
> 
> Toby Peterson VIN 2248
> Winged1
> 
> --- In dmcnews@xxxx, Soma576@xxxx wrote:
> > Hey all,
> >i think the noise i've heard upon accelerating from 2500-2900 RPM 
> >is a thin metal heatshield that goes over the pass side exhaust 
> >manifold. it is super rusty and loose because it looks like some 
> straps or mounts are broken.
> >






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated