RE: [DML] t panel/door problem
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [DML] t panel/door problem



There are four tabs.
They don't have to be precise if you are using the old plastic upper RR
screen as it is called in the manual.
I don't exactly have a picture of the tabs but I do have a picture that
shows two replacement brackets for the upper RR screen that should locate
three of the four tabs for you.
www.mindpsring.com/~kecreason/delorean
Check the pic of the brackets installed. The tabs are about an inch to two
in from each side of the big 18" bracket, about 1 in from the left edge of
the right bracket (shown). The left side tab would be identical to this
outer tab.

HTH

Stay cool.
-Kevin
#4687
Houston

-----Original Message-----
From: fluxmcfly [mailto:bfreyguy@xxxx]
Sent: Wednesday, June 05, 2002 6:52 PM
To: dmcnews@xxxxxxxxxxxxxxx
Subject: [DML] t panel/door problem


Has anybody had any trouble with there t panels in the past,it seems
someone has cut off the tabs on my t panel and glue it down and now
it's peeling up in the back. 





Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated