Your bonnet has popped because someone tried to jam too much stuff in the trunk. I fixed mine by removing the bonnet from the car. Then where the ground strap goes in the front edge of the stainless attached a #4 screw and nut onto a short "L" bracket where the bracket goes over the fiberglass part. You probably need to clamp the stainless and fiberglass parts while attaching the bracket so you get a tight fit. The screw is completely hidden behind the fascia. ----- Original Message ----- From: Paul Salsbury <paul.salsbury@xxxx> To: <doc-uk@xxxxxxxxxxxxxxx> Cc: <dmcnews@xxxxxxxxxxxxxxx> Sent: Thursday, April 18, 2002 9:19 AM Subject: [DML] Bonnet > In my quest for a flat and level bonnet, I have > managed to get mine to sit flat to the wings at the > wind screen end, however the front is still sitting > proud to the facia. > When I press down on the offending corners they go > exactley where they should be, closer inspection > reveales the stainless is actually lifted away from > the black inner. > Is there any way of re-attaching this together? > > Paul > #6463 > > > > To address comments privately to the moderating team, please address: > moderator@xxxx > > To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > > >