there are little tabs that can be bent to "hug" the black inner. you can use a pair of pliers to do the job but remember to put some material between the plier jaws and the top of the bonnet as to not scratch the hood surface. This did the trick for me Joseph vin 2850 ----- Original Message ----- From: "Paul Salsbury" <paul.salsbury@xxxx> To: <doc-uk@xxxxxxxxxxxxxxx> Cc: <dmcnews@xxxxxxxxxxxxxxx> Sent: Thursday, April 18, 2002 9:19 AM Subject: [DML] Bonnet > In my quest for a flat and level bonnet, I have > managed to get mine to sit flat to the wings at the > wind screen end, however the front is still sitting > proud to the facia. > When I press down on the offending corners they go > exactley where they should be, closer inspection > reveales the stainless is actually lifted away from > the black inner. > Is there any way of re-attaching this together? > > Paul > #6463 > > > > To address comments privately to the moderating team, please address: > moderator@xxxx > > To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > >