Re: [DML] Arm rest removal, It's stuck!
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Arm rest removal, It's stuck!



Just figured this one out myself. After you remove the 4 or so screws and
the plastic barbs, there's one step left. You've got to remove the plastic
trim that goes around the inside door handle/lock (by lifting up the
handle and sliding it out) and remove the mirror switch (drivers side) or
the plastic filler piece (passenger side). Now look in where the mirror
switch was (or the filler piece) and you'll see a 10mm bolt. Take it out,
along with the other one just like it a little further back. The one
closer to the rear of the door is somewhat obstructed by one of the door
lock rods, but it can just be pushed out of the way.

No you should be able to take the lower door panel off.

-Christian

On Thu, 11 Apr 2002, bob.hlavacek wrote:

> I'm trying to get the armrest off to get at my window. The screws on top
> are out and the plastic barbs on the bottom are out, but it won't come off.
> Something in the area of the hand hold is still attached, I think. Does
> anyone know what it is that's still attached, and where it is?
>
> Thanks
> Bob Hlavacek 10961
>
>
>
>
> To address comments privately to the moderating team, please address:
> moderator@xxxx
>
> To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated