Re: [DML] Arm rest removal, It's stuck!
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [DML] Arm rest removal, It's stuck!
- From: Martin Gutkowski <webmaster@xxxx>
- Date: Fri, 12 Apr 2002 09:45:59 +0100
There are instructions in the DMCNews tech section on how to remove the
door trim and also how to get to these bolts - but don't do what I did
and destroy your mirror switch trying to remove it! You need to take out
the mirror switch in order to access one of these bolts
I would disagree with Bob - getting the bolts OUT is not a problem.
Getting the buggers back IN, now that's another story...
Martin
#1458
Robert Brandys wrote:
There are two 10mm bolt at the top of the arm rest by the handle. They
are very tricky to get out. you need at least a 8" extension to you
spin tight handle and the 10mm socket. I use a flashlight with the
handle plastic insert removed to better see these bolts.
BOB
Back to the Home of PROJECT VIXEN