Re: [DML] update on speedo noise

["K Creason" <dmc4687@xxxx>]

I can't remove my dustcap. It was kind of like glued around the cap, but
I've broken that loose but it still won't pop out. Is it suppossed to be
that tight?

Also, I bought a quart of gear oil (85w/140) and a needle for my grease gun.
Which is better for the angle drive, heavy gear oil (is that heavy enough?)
or regular grease injected via needle & gun?

----- Original Message -----
From: "K Creason" <dmc4687@xxxx>
To: "Dmc /dml" <dmcnews@xxxxxxxxxxxxxxx>
Sent: Saturday, October 06, 2001 8:25 AM
Subject: [DML] update on speedo noise


> I've been trying to narrow down the source of my speedo noise. To recap,
the
> speedo works great, is accurate, but it there is a clicking noise, at
least
> up to 45mph. At a slight roll it's a very loud clack, but is only every
few
> seconds. At 40mph is isn't always noticeable, and there is just a slight
> shiver to needle.
>