David, Be aware that grounding the temperature gauge sensor wire will burn out the gauge movement. "We're here to help you" DMC Help / De Lorean Services / <dmchelp@xxxx> Web Site: <www.deloreanservices.com> ----- Original Message ----- From: <jtrealty@xxxx> To: <dmcnews@xxxxxxxxxxxxxxx> Sent: Tuesday, February 20, 2001 11:43 PM Subject: [DML] Re: temp gauge > Upon reviewing the wiring diagram and the manual if the voltmeter is > working the most likely problem is either a broken or disconnected > wire to the sending unit. It is located under the intake manifold on > the water distribution pipe. See parts manual 2-3-0 and 1-3-0. It is > hard to reach, the easiest way is to remove the intake manifold. It is > also possible for the sending unit to be bad, to test just momenteraly > ground the wire, you should see the gauge move. > David Teitelbaum > vin 10757