Hi everyone, I guess most people know about the "tempermental connectivity" fix of installing the Radio Shack machine screws and nuts through the rivets and tightening them down. But I was wondering, is it ok to just put a drop of solder next to each of the rivets? (so that half the drop touches the base of the socket, and the other half touches the metal surface of the circuit board). Has anyone done this? I would like to solder rather than put in the screws and nuts, but thought I'd ask all the experienced folk first if there are any problems with doing so. Thanks, -Derek L. VIN 5302 To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/