Re: [DML] Tail-light circuit boards - soldering ok?

["Christopher Hawes" <chris@xxxxxxxxxxxxxxxxxxxxxxx>]

I did, provides lovely intense even lumination.  My also have the nut and
screw method too.

Regards

Chris

----- Original Message ----- 
From: "lakelanier20" <derek4567@xxxxxxxxxxx>
To: <dmcnews@xxxxxxxxxxxxxxx>
Sent: Wednesday, August 04, 2004 6:32 PM
Subject: [DML] Tail-light circuit boards - soldering ok?


> Hi everyone,
>    I guess most people know about the "tempermental connectivity" fix
> of installing the Radio Shack machine screws and nuts through the
> rivets and tightening them down.  But I was wondering, is it ok to
> just put a drop of solder next to each of the rivets?  (so that half
> the drop touches the base of the socket, and the other half touches
> the metal surface of the circuit board).  Has anyone done this?  I
> would like to solder rather than put in the screws and nuts, but
> thought I'd ask all the experienced folk first if there are any
> problems with doing so.
>
> Thanks,
> -Derek L.
> VIN 5302




To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/