[DML] Sealing the Fuel Pump Ring
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Sealing the Fuel Pump Ring



I would like some feedback on an idea I just had while preparing my car for
the trip to Pigeon Forge in June.
 
While in the gas tank, cleaning the rust and other crud out, I noticed that
the (106684 Fuel Pump Cover Seal) still allowed moisture to accumulate
around the top of the fuel pump.
 
I  installed the (101957 Plenum Drain Tube) a couple of years ago to prevent
the water from the air plenum draining onto the fuel pump cover seal.
 
My idea is to use spray urethane foam to fill the the top of the fuel pump
in the (101391 Fuel Pump Ring).
 
The upside that I see is that water would not be able to get to the top of
the fuel pump and seep into the tank.
 
The downside is that it would be an absolute bear to service the pump in the
future.
 
Give me the Good, the Bad and the Ugly of my idea.
 
Scott Mueller
002981
RNDOLA
DOC-UK 357 Magnum
DOA
 
 
 


[Non-text portions of this message have been removed]




To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
     http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
     dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/
 



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated