[DMCForum] Re: Delorean 5096
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DMCForum] Re: Delorean 5096



--- In DMCForum@xxxxxxxxxxxxxxx, "Walter Coe" <Whalt@xxxx> wrote:
> I keep raggin on Samuel that he needs to have the car look
> nice at least from the outside.  I suggested that he
> _at_least_ get some cheapo red spray paint to restore the
> stripped blotches on the stainless.  Nope, not a chance.
> Well, soon he will find out just how non-anonymous these
> cars are, so it is important to always look your best.  I
> get people all over town saying hi and telling me about
> other DeLoreans they see around town.  Funny how I never
> find them.  I hear about a red one and a green one both with
> really bad paint jobs flaking everywhere.  Now Samuel is
> going to be driving another red one with a really bad paint
> job!  ;-)
> 

Walt doesnt realize that for the process of stripping a car, it has 
to be partly painted at some point as you strip areas off. Think I 
will start on the front and work my way back. I know the driver rear 
panel is likely to be replaced. Overall, I think the car is in decent 
condition considering it sat for 10 years. I know it needs work but 
if it just sits there I'm not motivated to do things. If it is usable 
then I will use it and am more motivated to fix things.


> More funny things to mention about Samuel's car: the
> previous owner butchered the connections to the cooling fans
> and started running new wires to power them.  Luckily they
> didn't do any permanent damage except maybe shorten the
> wires coming out of the fans.  The next worst thing was the
> trailing arm bolts.  One side was obviously replaced, but
> they put the shims on the wrong side where they don't do any
> good.  I knew something was wrong when the car touched
> Florida road for the 1st time.  The wheel was way too far
> toe-in.

Someone butchered the connections, but, I have the original 
connectors and am getting a crimper to put the new molex terminals 
on. Easy fix. I'm going to swap the trailing arm bolts out anyways 
with better bolts so the toe-in wont last long.


Samuel



Yahoo! Groups Sponsor	 
 
<http://rd.yahoo.com/SIG=12cb610ih/M=259395.3614674.4902533.1261774/D=egro
upweb/S=1705126215:HM/EXP=1069778349/A=1524963/R=0/*http://hits.411web.com
/cgi-bin/autoredir?camp=556&lineid=3614674?=egroupweb&pos=HM> 	 
 
<http://us.adserver.yahoo.com/l?M=259395.3614674.4902533.1261774/D=egroupm
ail/S=:HM/A=1524963/rand=878439291> 	

To unsubscribe from this group, send an email to:
DMCForum-unsubscribe@xxxxxxxxxxxxxxx



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> . 

<<attachment: winmail.dat>>



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated