[DMCForum] car cold, low idle, runs rough --> car warm, high idle, runs good

[<ken@xxxxxxx>]

Basically, my mixture screw was adjusted last summer by a garage, when I
had trouble getting the car running again after installing a new
distributor, rotor, wires and plugs.

Ever since then. the car will run rough when its cold and idle around
850, it honestly sounds like it will STALL if I don't pop the
accelerator once and a while

Once the car is warm, it idles around 1500 and runs fine


What adjustments can I tweak to correct this problem

As of now, I am 99% sure the timing is correct (checked it with a timing
light)

As well, the mixture screw is not TOTALLY out of whack, but if I had to
guess it has something to do with this

Also, the 3 brass screws are not adjusted at all, they are simply
snugged down by hand


Thank you
Kenneth
005541



[Non-text portions of this message have been removed]



Yahoo! Groups Sponsor	 

ADVERTISEMENT
 
<http://rd.yahoo.com/M=194081.3897168.5135684.1261774/D=egroupweb/S=170512
6215:HM/A=1732163/R=0/SIG=11n0nglqg/*http://www.ediets.com/start.cfm?code=
30510&media=zone> click here	
 
<http://us.adserver.yahoo.com/l?M=194081.3897168.5135684.1261774/D=egroupm
ail/S=:HM/A=1732163/rand=702434111> 	

To unsubscribe from this group, send an email to:
DMCForum-unsubscribe@xxxxxxxxxxxxxxx



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .

<<attachment: winmail.dat>>