I will admit to not needing to remove one as yet but there are 4 bolts on the hub that hold it in place (I've had the hub assembly off, replaced wheel bearing, but as yet, no need to do brake discs) Martin erikgeerdink wrote: >Verify that I have everything off that needs to be off. > >wheel >plastic cap >caliper >"D" nut >washer > >Do I need to remove the angle drive and big nut that it connects to? > >Erik > > > >--- In DMCForum@xxxxxxxxxxxxxxx, Martin Gutkowski <webmaster@xxxx> >wrote: > > >>Get a decent sized hammer and then >> >>Step 1: tap left side >>Step 2: tap right side >>Step 3: tap top >>Step 4: tap bottom >> >>Repeat for 10 minutes >> >>Trust me, it WILL come off. >> >>Martin >> >>erikgeerdink wrote: >> >> >> >>>What is the process to remove the front rotors? I can't seem to >>> >>> >get > > >>>them off. Anyone have a "step by step" written up? >>> >>>Erik >>> >>> >>> >>> >>> > > > >To unsubscribe from this group, send an email to: >DMCForum-unsubscribe@xxxxxxxxxxxxxxx > > > >Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > > > >. > > > [Non-text portions of this message have been removed] Yahoo! Groups Sponsor <http://rd.yahoo.com/M=259395.3614674.4902533.1261774/D=egroupweb/S=170512 6215:HM/A=1524963/R=0/SIG=12o885gmo/*http://hits.411web.com/cgi-bin/autore dir?camp=556&lineid=3614674?=egroupweb&pos=HM> <http://us.adserver.yahoo.com/l?M=259395.3614674.4902533.1261774/D=egroupm ail/S=:HM/A=1524963/rand=819430867> To unsubscribe from this group, send an email to: DMCForum-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .
<<attachment: winmail.dat>>
Back to the Home of PROJECT VIXEN