it can come off 2 ways, really. If you remove the outer hub nut, you have to slide the bearing (and disc) off the spindle. ALTERNATELY, you can unbolt the inside nut (angle drive), and the whole spindle will come out. Normally one way is easier than the other. I'm not sure which. My left brake rotor came off with the spindle easily, the right rotor came off the spindle easily (well, easier!). I have not, though imagine you could use a large gear puller to pull the rotor/bearing off the spindle. Jim On Mon, 08 Sep 2003 20:40:44 -0000 "erikgeerdink" <erikgeerdink@xxxxxxxxx> writes: > Verify that I have everything off that needs to be off. > > wheel > plastic cap > caliper > "D" nut > washer > > Do I need to remove the angle drive and big nut that it connects to? > > Erik > > > > --- In DMCForum@xxxxxxxxxxxxxxx, Martin Gutkowski <webmaster@xxxx> > wrote: > > Get a decent sized hammer and then > > > > Step 1: tap left side > > Step 2: tap right side > > Step 3: tap top > > Step 4: tap bottom > > > > Repeat for 10 minutes > > > > Trust me, it WILL come off. > > > > Martin > > > > erikgeerdink wrote: > > > > >What is the process to remove the front rotors? I can't seem to > get > > >them off. Anyone have a "step by step" written up? > > > > > >Erik > > > > > > > > > > > > ------------------------ Yahoo! Groups Sponsor > > To unsubscribe from this group, send an email to: > DMCForum-unsubscribe@xxxxxxxxxxxxxxx > > > > Your use of Yahoo! Groups is subject to > http://docs.yahoo.com/info/terms/ > > > ________________________________________________________________ The best thing to hit the internet in years - Juno SpeedBand! Surf the web up to FIVE TIMES FASTER! Only $14.95/ month - visit www.juno.com to sign up today! ------------------------ Yahoo! Groups Sponsor ---------------------~--> Yahoo! Autos. Everything you need to know about buying or selling a car. FREE Quotes, 360° Tours, Research, Blue Book, Compare Vehicles, Buy Used http://us.click.yahoo.com/kEZsdA/bwnGAA/YiGOAA/HliolB/TM ---------------------------------------------------------------------~-> To unsubscribe from this group, send an email to: DMCForum-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
<<attachment: winmail.dat>>