[doc] Re: plunger in fuel distributer
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[doc] Re: plunger in fuel distributer



--- In doc-uk@xxxxxxxxxxxxxxx, "blackaddertoo" <blackaddertoo@xxxx>
wrote:


> the plunger did not come out immediately so does this mean it was
> sticking or is this normal.


At rest the 'plunger'is weighted should move freely downwards by
gravity, the 'arm' on the metering flap moves this plunger up, if yours
is sticking then this needs to be resolved, it will effect your running
if it is sticking in certain positions.

On cleaning this up be careful not to score the surface of the plunger
it is a very delicately machined thing.I've heard people use acetone to
clean it up. Make sure the little o ring is in place on the underside
of the distributer where it bolts back on to the top of the metering
head.

A fuel pressure tester is a good investment when you have fuel issues.

Regards

Mike






DOC UK Website: www.deloreans.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine **




SPONSORED LINKS
Recreation Automotive Sports
Delorean part Delorean cadillac


YAHOO! GROUPS LINKS






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated