Re: [doc] help

["Daniel Howarth" <drseusse@xxxxxxxxxxx>]

What size drill bit do i use and does it have to be dead central


>From: Martin Gutkowski <martin@xxxxxxxxxxxxxx>
>Reply-To: doc-uk@xxxxxxxxxxxxxxx
>To: doc-uk@xxxxxxxxxxxxxxx
>Subject: Re: [doc] help
>Date: Tue, 30 Aug 2005 18:47:55 +0100
>
>Hi Dan
>
>It's really really easy if you take it off and do it on a pillar drill.
>10 or so 5mm M6 cap screws hold it down and the gasket is re-usable if
>you're careful
>
>If you're worried, send it to me, I'll do it. I could even send you one
>that's already been done in exchange if you like. No charge - it's so
>easy. You will have to fiddle with the mixture screw on the exchange one
>to get it going though because it'll be different from yours.
>
>The casting on the DeLorean engine was assembled so that you couldn't
>adjust the mixture. On the Volvo (065-type) intake plenum, there's a
>screw bunging it up
>
>Martin
>
>Daniel Howarth wrote:
>
> > Has anyone ever drilled out the bung that sits in the thingy just
> > above the
> > metering head mixture adjustment allen bolt. I've just been to see a 
>chap
> > that knows about the jet-tronic and he don't wanna touch it. So can
> > someone
> > help me?   Dan vin4986 Elanor
>
>
>







DOC UK Website: www.deloreans.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine **

---

YAHOO! GROUPS LINKS

•  Visit your group "doc-uk" on the web.
   
•  To unsubscribe from this group, send an email to:
   doc-uk-unsubscribe@xxxxxxxxxxxxxxx
   
•  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

---