RE: [doc] Cold Start Switch?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [doc] Cold Start Switch?



Hi Rich,

Thanks for your reply! I haven't really measured the
time it takes the engine to run smoothly, but from
memories, it becomes stabilise once I have driven the
D for about 5-8 minutes with 30mph... The temp needle
reachese the first 1/4 line.

I will give the vacumm hoses a good check... I will
let you know how it gets on!

Cheers!
John


--- Richard <dickyh11@xxxxxxxxxxx> wrote:

> Hi John
>
> The missing white module is for the interior light
> delay.
>
> The cold start injector is unlikely to be causing
> your problem - how
> long does the engine have to run before it smoothes
> out?
>
> It could be the CPR on the left hand rocker cover
> just in front of the
> oil filler is duff, but unlikely. Check your vacuum
> hoses are all
> connected up.
>
> The 'white relays' are actually ballast resistors
> designed to drop some
> voltage off the coil, yes they DO get hot.
>
> Rich H
> DOC 365 VIN 1274
>
>
> > -----Original Message-----
> > From: doc-uk@xxxxxxxxxxxxxxx
> [mailto:doc-uk@xxxxxxxxxxxxxxx] On Behalf
> Of
> > John Tien
> > Sent: 09 August 2005 19:26
> > To: doc-uk@xxxxxxxxxxxxxxx
> > Subject: [doc] Cold Start Switch?
> >
> > Dear all,
> >
> > My D tends to stall easily when start cold, and no
> > problem at all after the engine runs hot...
> >
> > I remember the previous owner saying he
> disconnected
> > the cold start switch (or hot? I am not sure) as
> he
> > live in Australia...
> >
> > In the fuse compartment, I see a white relay plug
> that
> > has no relay connected to it... is this the
> cold/hot
> > start thingy? And will this be the thing causing
> the
> > stalling problem I have in deadly hot Hong Kong?
> >
> > A friend of mine said there may be mis-fire or
> fuel
> > injection blockage on my car, as the engine kinda
> > vibrates when cold... but it tends to be ok once
> > hot... doesn't seems to be correct, right?
> >
> > Oh, on another matter... the white relays that's
> near
> > the engine compartment light switch gets hot to
> touch
> > after a while of driving... is this normal? I have
> > cleaned out the connections already...
> >
> > Many Thanks in advance for any help on this!
> >
> > Regards,
> > John Tien
> > DOC 8
> > RHD 3046
> >
> >
>
>
>      
>      
>            
>
___________________________________________________________
>
> Yahoo! Messenger - NEW crystal clear PC to PC
> calling worldwide with voicemail
> http://uk.messenger.yahoo.com
>
>
> DOC UK Website: www.deloreans.co.uk
> Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
> ** Unless otherwise stated, all messages posted to
> the group are assumed public and may be printed in
> the club magazine **
> Yahoo! Groups Links
>
>
>     doc-uk-unsubscribe@xxxxxxxxxxxxxxx
>

>
>
>
>



     
     
           
___________________________________________________________
Yahoo! Messenger - NEW crystal clear PC to PC calling worldwide with voicemail http://uk.messenger.yahoo.com


DOC UK Website: www.deloreans.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine **




YAHOO! GROUPS LINKS






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated