RE: [doc] Bonnet/hood Locked, Cable Broke cannot get in - HELP!
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [doc] Bonnet/hood Locked, Cable Broke cannot get in - HELP!



1 metre of the smallest size steel wire from B&Q  - 75p
1 steel ferule as used in electrical crimp connectors
Solder ferule on the end of the steel wire
Job done :D

Rich Hutchinson
DOC 365 VIN 1274

> -----Original Message-----
> From: doc-uk@xxxxxxxxxxxxxxx [mailto:doc-uk@xxxxxxxxxxxxxxx] On Behalf
Of
> Mike Bosworth
> Sent: 28 June 2005 09:31
> To: doc-uk@xxxxxxxxxxxxxxx
> Subject: Re: [doc] Bonnet/hood Locked, Cable Broke cannot get in -
HELP!
>
> -If you need to replace the actual cable a standard bike brake cable
> is all thats needed :) ....mine was off a bmx, just thread the cable
> through the existing external black sleeving..
>
> Regards
>
> Mike
> #2001/403



     
     
           
___________________________________________________________
Yahoo! Messenger - NEW crystal clear PC to PC calling worldwide with voicemail http://uk.messenger.yahoo.com


DOC UK Website: www.deloreans.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine **




YAHOO! GROUPS LINKS






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated