Re: [doc] Front wheel Alignment
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [doc] Front wheel Alignment
- From: "Chris Williams" <chris@xxxxxxxxxxxxxxxxxxxxxxx>
- Date: Thu, 23 Jun 2005 14:09:09 -0000
Thanks Martin.
I take it this will be understandable to the average wheel alignment
place?
Cheers again
Chris
--- In doc-uk@xxxxxxxxxxxxxxx, Martin Gutkowski <martin@xxxx> wrote:
> Camber is non-adjustable, it should toe-in 3mm per wheel but most
gauges
> work in degrees. That works out at 0.5 degree when measuring one
wheel
> against the other - 0.25 degree per wheel therefore.
>
> Martin
>
> Chris Williams wrote:
>
> > Hi All,
> >
> > I have just finished replacing track rod ends and steering rack
boots.
> > Clearly I will now have to have the front of the car aligned.
Can some
> > one please tell me the correct spec for the Delorean regarding
what
> > toe in/castor/camber etc the car should be set at.
> >
> > Thank you
> > Chris
> > Vin#4584
DOC UK Website: www.deloreans.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine **
Yahoo! Groups Links
Back to the Home of PROJECT VIXEN