Re: [doc] Front wheel Alignment
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [doc] Front wheel Alignment
- From: Martin Gutkowski <martin@xxxxxxxxxxxxxx>
- Date: Thu, 23 Jun 2005 15:02:19 +0100
Camber is non-adjustable, it should toe-in 3mm per wheel but most gauges
work in degrees. That works out at 0.5 degree when measuring one wheel
against the other - 0.25 degree per wheel therefore.
Martin
Chris Williams wrote:
> Hi All,
>
> I have just finished replacing track rod ends and steering rack boots.
> Clearly I will now have to have the front of the car aligned. Can some
> one please tell me the correct spec for the Delorean regarding what
> toe in/castor/camber etc the car should be set at.
>
> Thank you
> Chris
> Vin#4584
DOC UK Website: www.deloreans.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine **
Yahoo! Groups Links
Back to the Home of PROJECT VIXEN