I would use Cellulose paint thinner, but very very carefully on the plastic as it will dissolve it. Nothing will harm the stainless. Can't you over paint, touch up the plastic trim black? Regards Chris P -----Original Message----- From: jchapelhow [mailto:chapelhow@xxxx] Sent: 07 January 2004 21:54 To: doc-uk@xxxxxxxxxxxxxxx Subject: [doc] Removing paint spill from the stainless All. Question 3 of 3, separate posts so I can keep the answers straight! A slight accident has caused splatters of paint to spill onto the front wing of my car. I think my car is unique (certainly from the ones I have seen) in that it also has black plastic/rubber trim all round the outer wheel arch. So far I have tried both diluted and neat white spirit to no effect either on that trim or the stainless. What do a try next? Thanks in advance John Chapelhow DOC 19 : 'Boeing' 0737 DOC UK Website: www.deloreans.co.uk Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx ** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine ** Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/doc-uk/ To unsubscribe from this group, send an email to: doc-uk-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/