Re: [doc] A quick screw
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [doc] A quick screw



Simple answer here, but first a question

Has your car had a bezel on it before?

If no then you will have to drill the holes into the fascia ( as I had to ) and then, Yes I used the same screw size as the rear light clusters, replaced them all at the same time

There is a fair sized space behind the rear fascia in that area so there is not to much problem with the length of the screw.

Cheers
Paul

#6463
http://www.paul.salsbury.btinternet.co.uk 
----- Original Message ----- 
From: Phil Peters 
To: doc-uk@xxxxxxxxxxxxxxx 
Sent: Saturday, March 22, 2003 9:55 AM
Subject: [doc] A quick screw


Guys, 
Does anyone (maybe Paul S??) happen to know if the 4 screws which fit the Rear Licence Plate Bezel are the same size as the ones for the tail light clusters? I have a bezel on its way to me in the post but will probably need to buy some screws for it when it arrives. Thanks in advance!
-- 
Phil Peters 
VIN #4400 
DOC #84 
Wolverhampton
-- 
What do edentulous mammals not have? 
Find out at postmaster.co.uk

http://www.postmaster.co.uk/cgi-bin/meme/quiz.pl?id=216

Yahoo! Groups Sponsor 
ADVERTISEMENT




DOC UK Website: www.delorean.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine ** 

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. 



[Non-text portions of this message have been removed]





Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated