Hi Chris Thanks for the details Will check at the weekend thanks Kevin --- In doc-uk@xxxxxxxxxxxxxxx, "Chris" <chris@xxxx> wrote: > Kevin > > > > When standing at the the back of the D looking into the engine bay > > directly in front of you near the water pump, is a sensor that > > screws, it looks like into the water pump housing. It has two very > > small spade terminals which connects to the lead. I assumed this was > > the temp gauge. > No thats the sender for the cold Start valve (thermo-time switch) > > > > If the one that I think is the water temp gauge, not the water temp > > gauge do you know where it is. Could you also describe where the temp > > sender uner the air filter is. > The temp sender is on the RHD bank at the very back under (See parts manual > Section 1, Sub 1, group 5 item 45) or > http://www.usadmc.com/dmcstore/ViewDir.asp?PageID=10&PageCat=1% 2DEngine > item 45. $20 from DMCH, have tried cross referencing them but its finding > one callibrated to the gauge. But as i said b4 do NOT ground the wire > otherwise you will damage the gauge. > > Cheers > > Chris S