Dan The ignition needs a supply to be able to switch it.... I reckon the supply side is duff. I suggest un-plugging the igntiion barrel's connection and just test all the pins to see if you have a 12v feed on at least one of them. The Rover SDi ignition barrel will fit but is slightly different and requires a little bit of rewiring. Paul and I both got one from www.rimmerbros.co.uk (the one I got went to Rob Grady) Martin funkymcfly wrote: > Hi all, > > Well I've been "delving" in to the wonderful world of modified > DeLorean electrics... to say that my car is a little unusual would be > an understatement. Can you imagine buying a haynes manual for a car > only to find that your ACTUAL car bares little resemblence? Funny... > not. > > Anyhooo. I think I've determined that my relays (the ones I have) are > okay. The wiring is pretty much okay (except for one earth - on the > wiper unit) and I have hazards and beams... but no ignition. So I > think my ignition barrel has gone. Since everything PAST the barrel > works but turning the key gets nothing I can't see any other reason > for it! > > BUT.. the US web sites don't list them. Can we get them over here? > Are they serviceable? > > I'm gonna post this on the US forum too... > > Cheers peeps! > > Dan > Vin#5284 - Hana - www.projectmadness.com (nearly there!) > > > DOC UK Website: www.delorean.co.uk > Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx > ** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine ** > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/