Re: [doc] *** Over-heat protector kit components (from UK shops) ***

["Graham WELLS" <gwells@xxxx>]

I have done my own 'bleeder kit'; the only problem I had was that I
could not get the original barbed spur out of the thermostat housing. I
overcame this problem by taking off the thermostat cover and drilling
through the spur and then connecting the pipe T-piece etc, with black
pipe.

Chris, I've been near Derby in the last two days and thankfully I was
nowhere near you driving around with the bonnet open and a photographer
recording your acute worry at not being able to see where you were
going.!
When exactly is this being broadcast?

Have a ball at SCS and at the 'Dogs' the night before. I would have
loved to have been there
----- Original Message -----
From: "Chris Parnham" <chrisparnham@xxxx>
To: <doc-uk@xxxxxxxxxxxxxxx>
Sent: Friday, July 05, 2002 9:22 AM
Subject: RE: [doc] *** Over-heat protector kit components (from UK
shops) ***


> James,
>
> What does the "Radiator hose " look like ? is it black?
>
> Chris p
>
>
> -----Original Message-----
> From: jamesrguk [mailto:James_rg@xxxx]
> Sent: 04 July 2002 17:48
> To: doc-uk@xxxxxxxxxxxxxxx
> Subject: [doc] *** Over-heat protector kit components (from UK shops)
> ***
>
>
> Hi all,
>
> If you are thinking about buying and installing the 'Over-heat
> Protector Kit', which self bleeds the water pump, I am pleased to
> inform you that I have found all of the necessary components in a
> Hosequip shop and a motor store in Colchester.
>
> Required Parts:
>
> 1.25m of thin radiator hose
> 4 x Stainless Jubilee Clips (Hose Clips)
> 1 x Metal T-Piece
> 1 x Extended nipple for the bleeder hole
>
> All of this stuff cost me a total of just under £15.00 and I have
> fitted it today (see photos section on DOC E-Groups)
>
> These kits are $25 from the States and you have to pay postage and
> wait however long for them to turn up.
>
> If anyone would like the bits without having to buy them from the
> States and pay postage etc. then please e-mail me and I will make up
> some sets and take them to SCS. I will do them for £15 per set (which
> covers the cost for me to drive around Colchester getting the bits
> etc..).
>
> Regards
>
>
> James RG
>
> James_rg@xxxx
>
>
>
>
> DOC UK Website: www.delorean.co.uk
> Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
> ** Unless otherwise stated, all messages posted to the group are
assumed
> public and may be printed in the club magazine **
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>
>
>
>
>
> ------------------------ Yahoo! Groups
Sponsor ---------------------~-->
> Free $5 Love Reading
> Risk Free!
> http://us.click.yahoo.com/Pp91HA/PfREAA/Ey.GAA/HliolB/TM
> ---------------------------------------------------------------------~
->
>
> DOC UK Website: www.delorean.co.uk
> Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
> ** Unless otherwise stated, all messages posted to the group are
assumed public and may be printed in the club magazine **
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>
>
>