Martin, Once you get this integrated alarm-cum-door launcher all done will you be marketing it? ;o) Dan Vin#5284 - Hana ----- Original Message ----- From: "Martin Gutkowski" <webmaster@xxxx> To: <doc-uk@xxxxxxxxxxxxxxx> Sent: Thursday, March 14, 2002 1:16 PM Subject: [doc] Braided clutch and brake lines > Hi Guys > > In my work on the robots, I've made a very good contact which is a > company who make all kinds of hydraulic hoses. This includes for > automotive use. Chris, do you have an OEM clutch line and/or brake > flexi-hoses? I'd like to see how much it'd cost to get them copied in > stainless braided line. I wouldn't use the hoses. > > Considering I've got myself 2m of 1/2" braided petrol hose for my fuel > tank pickup for the grand sum of £6 I'm quite confident we can get > several made for a song. > > I've also made a very good contact of a Laser Cutting company - who work > in stainless all the time. If you want any custom designs made, just get > them to me in diagram form. The chances are we'll get them for nothing > (you know the pattern on the side of our robot? go figure.... ) > > The project I've currently got on the boil for the DeLorean is a fully > integrated alarm system, remote start, remote locking and remote door > launchers. The system is based on an off-the-shelf system from the US, > but I'm building some electronics allowing the same keyfob to control > the doors too. It's making a nice inexpensive challenge. I intend to > house my "box" inside the door lock module box - I've redesigned the > door lock module itself completely, so it'll now fit on one corner of > the same board. The door launchers use the wiring for the lock > solenoids, and the interface to the alarm box will be a mere two wires > in addition to the stock loom. > > Martin > > > > DOC UK Website: www.delorean.co.uk > Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxx > ** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine ** > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > > >