Re: [doc] Sealing the Fuel Pump Ring

[Martin Gutkowski <webmaster@xxxxxxxxxxxxxx>]

Is your fuel pump cover one of the thin shiny ones? The ones DMCH sell 
are much better, made of (apprently) the same stuff as the main boot, 
and it thunks down really well, clipping over the boot. The two hoses 
need to be sealed around the top but these covers are much better at 
that. We supply all new hoses that are quite fat and seal really tightly 
in the cover

Martin

Scott Mueller wrote:

>I would like some feedback on an idea I just had while preparing my car for
>the trip to Pigeon Forge in June.
> 
>While in the gas tank, cleaning the rust and other crud out, I noticed that
>the (106684 Fuel Pump Cover Seal) still allowed moisture to accumulate
>around the top of the fuel pump.
> 
>I  installed the (101957 Plenum Drain Tube) a couple of years ago to prevent
>the water from the air plenum draining onto the fuel pump cover seal.
> 
>My idea is to use spray urethane foam to fill the the top of the fuel pump
>in the (101391 Fuel Pump Ring).
> 
>The upside that I see is that water would not be able to get to the top of
>the fuel pump and seep into the tank.
> 
>The downside is that it would be an absolute bear to service the pump in the
>future.
> 
>Give me the Good, the Bad and the Ugly of my idea.
> 
>Scott Mueller
>002981
>RNDOLA
>DOC-UK 357 Magnum
>DOA
> 
> 
>  
>




DOC UK Website: www.deloreans.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine **

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/doc-uk/
   
• To unsubscribe from this group, send an email to:
  doc-uk-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.