Re: [doc] Horror Of Getting Stuck In Gear At A Junction (Cutch Cylinder?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [doc] Horror Of Getting Stuck In Gear At A Junction (Cutch Cylinder??)



Hazarding a guess, the master is gummed up and the return spring wasn't 
enough to pop it back out. Look to see if it's all wet around where the 
clutch linkage goes through the floor

Rebuilding one today actually :-)

Martin

Simon Prince wrote:

>Can anyone advise...
>
>Driving back to my house suddenly the clutch pedal was as loose as 
>anything with no operation what so ever with the car stuck in 3rd, 
>managed to 'slam' the gear stick into neutral and then slam it into 
>1st at the traffic lights (the engine didn't really like that at 
>all), then an up hill nightmare - I couldn't get it out of 1st and 
>had to force a stall at a junction (otherwise I would have totalled 
>it !!).  Drove another mile in 1st again and just got it on my drive 
>OK - AND THEN THE CLUTCH PEDAL WORKED FINE AGAIN, **** !!!
>
>What's the problem ...
>
>The Clutch Cylinder ??
>If that's the case which one ?? (Master or Slave Cylinder ?)
>
>  
>




DOC UK Website: www.deloreans.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine ** 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/doc-uk/

<*> To unsubscribe from this group, send an email to:
    doc-uk-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 





Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated