[doc] Manifold Studs

[DMCVIN6683 <dmcvin6683@xxxxxxxxx>]

I just got all of my manifold studs out today. I had one broken one 
that was broke off inside the head.

What i use to remove it was a Left Hand Drill Bit and a center punch.

A left Hand Drill Bit is a Drill Bit that is used in the Reverse speed 
of the Drill. Most Drill bits are used in the forward speed, this means 
when you are drilling out a manifold stud you are also tightning it 
too. With a Left Hand Drill Bit you are using it in the Reverse speed 
so that means you might get lucky and back the stud out while you are 
drilling into it.

I got lucky and it backed out while i was drilling into it.

What i did was use the center punch to mark a spot on the stud in the 
center so i would have indent so the drill bit wouldnt wander when i 
was starting to drill.

Just an FYI for you all in case you do this job for yourself.

Mark V






DOC UK Website: www.deloreans.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine **

SPONSORED LINKS

Recreation	Automotive	Sports
Delorean part	Delorean cadillac

---

YAHOO! GROUPS LINKS

•  Visit your group "doc-uk" on the web.
   
•  To unsubscribe from this group, send an email to:
   doc-uk-unsubscribe@xxxxxxxxxxxxxxx
   
•  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

---