 
Re: [doc] re my car now runs!!
    
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [doc] re my car now runs!!
- From: "blackaddertoo" <blackaddertoo@xxxxxxxxxxx>
- Date: Mon, 13 Feb 2006 23:39:10 -0000
Hi Chris
that would be good....!!!the whole mag devoted to my VIN 1621 and 
getting her on the road.
Joking aside, i feel i have learned loads about how these cars were 
put together and the workings of the PRV.
she looks a bit sorry now though with an interior in peices and axle 
stands at the back/space saver vauxhall wheel at the front!.
Spare seats behind it in the garage as i have run out of room, as 
well as pirelli 235's waiting to be fitted!!!!, and lower engine 
cover removed for easier idle system tinkering!!.
front bumper temporarily held by 2 screwswhile i decide who best for 
a repaint.
this could be a new one, how much can you cram in a small garage and 
still work on the car!!
if anyone needs a pump rebuild there is an excellent place in 
Wolverhampton, lifetime guarantee. There is also an injection 
specialist near the Merry hill centre.
Regards
Steve
--- In doc-uk@xxxxxxxxxxxxxxx, "Chris Parnham" <secretary@...> wrote:
>
> Steve,
> 
> I hope you are writing up this saga for the magazine!   It will go 
on
> for pages! 
> The headliners slide...I can't remember which way, but even I 
managed
> that.
>  
> Once you have them off, I recommend cleaning them up and coating/
> reinforcing them (re-shaping) using glass fibre resin (and matting 
of
> required).
> 
> Dave Howarth can supply the material, but I personally recommend a
> professional trimmer to re-do them.  
> 
> Best regards
> Chris Parnham
> DOC 2
> RHD  vin  12173  "Gully"
> BTTF vin  20049  "Backy"
> 
> 
> -----Original Message-----
> From: doc-uk@xxxxxxxxxxxxxxx [mailto:doc-uk@xxxxxxxxxxxxxxx] On 
Behalf
> Of blackaddertoo
> Sent: 12 February 2006 03:31
> To: doc-uk@xxxxxxxxxxxxxxx
> Subject: [doc] re my car now runs!!
> 
> Hi
> all
> just a quick update an thanx anyone who gave info.
> 
> my car now starts and runs ok. first turn of the key today after a 
> week.
> 
> she hunts a little at idle, but as yet i haven't jubillee clipped 
> the idle hoses etc.
> i can live with this anyway untill i give it a blast.
> seems to be the rpm relay and have cleaned all wires to/from coil. 
i 
> think the ecu feed wires were dirty giving a poor/intermittent 
pulse 
> signal.
> 
> now took all wheels off for refurb (thanx tracy a n plate cavalier 
> wheel does fit fine)
> so she is now on the space saver and cavalier wheel at front and 
> axle stands at rear!.
> once iv'e got these done, onto the front screen and steering bush.
> 
> for the headliners, once you remove the visors should the t piece 
> slide back and down?. seems to be well fixed/or glued.
> the material has come off just leaving messy foam backing.
> 
> didn't want to damage it.
> have also unbolted the seats ready for removal. (just no where to 
> put them!!)
> 
> want to be on the road in spring if possible!!.
> 
> Regards all
> 
> Steve
> 
> 
> 
> 
> 
> 
> DOC UK Website: www.deloreans.co.uk
> Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
> ** Unless otherwise stated, all messages posted to the group are 
assumed
> public and may be printed in the club magazine ** 
> Yahoo! Groups Links
>
DOC UK Website: www.deloreans.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine **
    
  
  
    SPONSORED LINKS
  
       
  
  
  
  YAHOO! GROUPS LINKS
  
 Back to the Home of PROJECT VIXEN
 Back to the Home of PROJECT VIXEN