Re: [doc] couple of tech questions

[Nick Tomlinson <nickandkathryntomlinson@xxxxxxxxxxx>]

If the blue shielded cable just has the plastic chewed so just exposing the outer shield then all I would do is put some heat shrink tube over it and heat it till it shrinks.
  If you can see the inner core then you would ideally need to remake the cable with new shielded wire in the ecu. The shieling ends at the bulkhead anyway.
   
  Richard Hutchinson shoud be able to do that in a jiffy if you cross his palm with silver :)
   
  NickT.

blackaddertoo <blackaddertoo@xxxxxxxxxxx> wrote:
  so far i found one mouse nest behind the front grill and one in the 
cubby box behind driver, and some rubbish round the idle ecu.
the wire from the lambda sensor has some chew marks and has exposed 
the shield part of the cable.
maybe i should pull out the lambda ecu to see if the mouse had chips 
for dinner!!!!.
not sure yet how i can replace the shielded wire as its built into 
the connector i think.

Regards

Steve




--- In doc-uk@xxxxxxxxxxxxxxx, Nick Tomlinson 
wrote:
>
> Have you tried disconnecting the rat from the wiring :)
> 
> NickT.
> 
            
---------------------------------
Yahoo! Photos ? NEW, now offering a quality print service from just 8p a photo.

[Non-text portions of this message have been removed]






DOC UK Website: www.deloreans.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine **

---

YAHOO! GROUPS LINKS

•  Visit your group "doc-uk" on the web.
   
•  To unsubscribe from this group, send an email to:
   doc-uk-unsubscribe@xxxxxxxxxxxxxxx
   
•  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

---