Re: [doc] sheered bolts

["Chris Hawes" <chris@xxxxxxxxxxxxxxxxxx>]

Thanks for the feedback everyone.

- I will find a machine shop and have some stainless threads 'inserted' into 
the original locations along the spoiler and then use stainess nuts.
- The grill will have matching steel threads applied, it will be repainted 
after prepping and then copper grease will be applied to the threads with 
stainless nuts.

The cowling is held in place by 4x threaded bolts that are screwed into 
rivnuts.  I have found one that is loose enough for the washer to twidle but 
cannot be undone as the rivnut must be turning too.  What would be the best 
way forward?

Thanks in advance

Chris H
vin5255 






DOC UK Website: www.deloreans.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine **

---

YAHOO! GROUPS LINKS

•  Visit your group "doc-uk" on the web.
   
•  To unsubscribe from this group, send an email to:
   doc-uk-unsubscribe@xxxxxxxxxxxxxxx
   
•  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

---