RE: [doc] Removal of rusty screws
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [doc] Removal of rusty screws



As far as I remember the lower side trims are not affected by rear quarter
panels, the small lower trim at the back is attached to the panel.
The rubber seal inside the door may need removing to access half the screws,
the other screws are hidden behind the rear fascia which will have to be
removed.
As for the fender, not sure, but don't think it would interfere with the
lower trim. If it's not urgent I'll have a look on Saturday as I still only
have one sides' trim attached.

Richard


-----Original Message-----
From: Martin Gutkowski [mailto:webmaster@xxxx]
Sent: 06 June 2002 17:03
To: doc-uk@xxxxxxxxxxxxxxx
Subject: Re: [doc] Removal of rusty screws


I don't remember there being a fitting on the quarter panels which would 
be interfered with by the lower side trims. Not sure about the fenders - 
Rich?

BTW they'd be a bitch to remove because they are steel screws in 
aluminium rivnuts. I think Rich took one of mine out to see what they 
were (!)

Martin
#1458

dmcnorway wrote:

>AFAIK, these panels must be loosened in order to adjust the fender 
>and quarterpanel so that they align with the door.
>
>Stian
>



DOC UK Website: www.delorean.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed
public and may be printed in the club magazine ** 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ 



________________________________________________________________________
The original of this email has been scanned for viruses by the Government
Secure Intranet (GSI) virus scanning service supplied exclusively by Cable &
Wireless in partnership with MessageLabs.

GSI users - for further details, please contact the GSI Nerve Centre, or
browse GNC 003/2002 at http://www.gsi.gov.uk/main/new2002notices.htm

In case of problems, please call your organisations IT helpdesk.


**********************************************************************
This email and any files transmitted with it are private and intended 
solely for the use of the individual or entity to whom they are addressed. 
If you have received this email in error please return it to the address 
it came from telling them it is not for you and then delete it from your system.

This email message has been swept for computer viruses.

**********************************************************************





Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated