[DML] Re: Bill's LED Floor Lights
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[DML] Re: Bill's LED Floor Lights
- From: "content22207" <brobertson@xxxxxxxxxxxx>
- Date: Thu, 22 Mar 2012 02:12:08 -0000
Some pics I already had have been uploaded to #5939's photo album. You have to be a Yahoo user to see them.
There are 4 SMD array bulbs altogether -- 2 on each side. This is the passenger kneepad (also shows my *NORMAL SIZE* cigarette lighter):
http://xa.yimg.com/kq/groups/1154320/hr/1800341937/name/FootwellLights1.jpg
The lights are wired in series from the passenger side A pillar, where they tap into the front courtesy light wiring, to the farthest bulb on the driver's left knee pad. Wiring uses bullet connectors to allow knee pad removal. Notice the bullets are keyed male/female -- it is impossible to reverse polarity (a handy technique to use whenever adding aftermarket terminals to a polarized circuit). Notice also the positive wire is purple, just like OEM courtesy light positive (NAPA sells purple wire). I used right angle quick connects to attach wires to the aftermarket bulb sockets, so all wiring stays naturally tucked behind the knee pad, nice and neat.
Another perspective of the passenger kneepad:
http://xa.yimg.com/kq/groups/1154320/hr/1505867999/name/FootwellLights2.jpg
This clearly shows the SMD array bulbs. most SMD LED's have 3 circuits per chip, whereas hemispherical LED's typically only have one circuit. That is a major reason why SMD's are so much brighter. Note again the cigarette lighter.
Bill Robertson
#5939
--- In dmcnews@xxxxxxxxxxxxxxx, "birdwell77095" <birdwells@...> wrote:
>
> Bill,'I like the floor lights that the picture showed. Can you post some details on how it was done and what parts to get?
> Shannon
>
------------------------------------
To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx
For more info on the list, tech articles, cars for sale see www.dmcnews.com
To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/dmcnews/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/dmcnews/join
(Yahoo! ID required)
<*> To change settings via email:
dmcnews-digest@xxxxxxxxxxxxxxx
dmcnews-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
dmcnews-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Back to the Home of PROJECT VIXEN