Re: [DML] Rear Fascia Warped?

[Farrar Hudkins <fhudkins@xxxxxxxxx>]

I'd set it on a flat surface with the lenses up and put it out in the 
sun for a while. My guess is the original warping was caused by heat, 
and you can use heat to "warp" it back into shape.

I dunno about "common" ... but just to give an example, it would appear 
that a previous owner of my car had the fascia off for long enough for 
it to "sag" in the middle -- enough so that the right lenses appear to 
be pointing up a bit. Evidently the material's pretty pliable! I hope 
putting in all the missing screws will fix my problem, but mine is 
vertical whereas yours is horizontal.

Okay, that probably wasn't any help at all. Sorry. :(

Farrar Hudkins
#2613

doctorDHD@xxxxxxx wrote:
> 
> 
> I just reinstalled the rear fascia and while the sides line up. the center
> is warped towards the front of the car and thus the engine cover does not
> close.
> 
> is this common? Any solution?


To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:dmcnews-digest@xxxxxxxxxxxxxxx 
    mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/