In the DeLorean parts manual on page 3,5,1 is a picture of the number plate lamp assembly part number 100438. It shows a screw holding the lamp in place. In my DeLorean I have to remove the tail light assembly 100436 first before I can remove the number plate lamp. Why? Because there is a small nut holding the screw for the number plate lamp assembly. With one hand I turn the screw driver and the other hand I hold the nut in place. Some time ago someone told me there was a metal plate holding the other end of the screw. Not sure what happened to my metal plate but that's what I found when attempting to remove my number plate lamp assembly. Mark R. Vanyo. VIN 02261. --- In dmcnews@xxxxxxxxxxxxxxx, "daviddlasvegas" <daviddlasvegas@...> wrote: > > I unscrewed my license plate light fixtures to clean them. They were > filthy. The problem is I didn't realize that there were bolts under > the frame, and they fell into the car body. So now I can't figure out > how to put the light fixtures back on. There is nothing to hold the > bolts onto the car frame. I tried using bigger screws to hold into the > plastic body, but they don't fit into the light fixtures. > To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/dmcnews/join (Yahoo! ID required) <*> To change settings via email: mailto:dmcnews-digest@xxxxxxxxxxxxxxx mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/