RE: [DML] Broken Exhaust Manifold Stud
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [DML] Broken Exhaust Manifold Stud



Woody, You are going to have to drill it out. So you will need to center
punch the stud or get a 135 split point drill bit so it won't walk when you
start to drill. Be very care full and drill straight and use the correct
size EZ out for the screw. It will come out.
John Hervey
www.deloreanautoparts.com
www.specialtauto.com

  

-----Original Message-----
From: dmcnews@xxxxxxxxxxxxxxx [mailto:dmcnews@xxxxxxxxxxxxxxx] On Behalf Of
Woody
Sent: Saturday, May 26, 2007 12:40 AM
To: dmcnews@xxxxxxxxxxxxxxx
Subject: Re: [DML] Broken Exhaust Manifold Stud

You wouldn't think it works without destroying the surrounding
aluminum,but I've heated the stud remains with a torch, hit the air,
and blew out most of the stud without harming the head. 

However, my first choice would be to drill out the stud large enough to
use an " e-z out" then heat the area with a Mape gas torch (hotter than
propane), then install and try to remove with the e-z out.



       
____________________________________________________________________________
________Sick sense of humor? Visit Yahoo! TV's 
Comedy with an Edge to see what's on, when. 
http://tv.yahoo.com/collections/222


To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at
http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links






To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:dmcnews-digest@xxxxxxxxxxxxxxx 
    mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 


Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated