I've owned my car for almost 4 years and need to replace the CV boots for the third time. The outers are ok buy the inners are torn near the transmission, ie the big end. Any ideas as to what I could be doing wrong during the installation. They don't seem to be torn right at the clamp so I don't think the clamps are too tight... and yes the boots come from a well known DeLorean vendor. Dave Delman aka D� & 6530 (Still driving with a 2700 ohm resistor in series with my ignition pickup coil and now clue as to why it doesn't run right without it...) To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/