Re: [DML] Orifice Tube
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [DML] Orifice Tube
- From: "sweetp01569" <paul.sweet@xxxxxxxxxxxx>
- Date: Fri, 07 Jul 2006 00:46:47 -0000
I'll reply to my own message. I ended up taking out the evaporator by
the book, and removed center console, glove box, kneepad, etc. Took
out the entire heater/AC box. What a bitch job that is! I hope I
can remember and backtrack my steps to get it all back together again.
Paul
--- In dmcnews@xxxxxxxxxxxxxxx, "sweetp01569" <paul.sweet@...> wrote:
>
> Replying to an old post. I, too had trouble with my orifice tube
> stuck in the pipe. I drilled it out, but with it, a hole through
> through the avaporator tube as well! I just ordered a new
> evaporator. Can anyone piont me to some good step by step
> instructions for replacing the evaporator? I got eight of the
eleven
> casing screws out. Any tips in dropping the evaporator out?
>
> Thanks,
> Paul
>
>[moderator snip]
To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx
For more info on the list, tech articles, cars for sale see www.dmcnews.com
To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/dmcnews/
<*> To unsubscribe from this group, send an email to:
dmcnews-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Back to the Home of PROJECT VIXEN