[DML] Re: Lifetime Water pump bolt questions

["David Teitelbaum" <jtrealty@xxxxxxxxxxx>]

Use Never-Seize on new bolts. Put the water pump and water
distribution pipe back in with new seals and hoses. BEFORE you put the
intake manifold back on fill the cooling system, bleed and pressure
test. Use silicone gasket sealer on the "O" ring seals. Make sure it
says "Sensor Safe" on the tube. Put a small amount on your finger and
smear it onto the "O" rings. Just be careful a particle of dirt does
not get onto it before you assemble and the "O" rings do not move out
of place.  
David Teitelbaum
vin 10757


--- In dmcnews@xxxxxxxxxxxxxxx, "Charles Major" <charlesmajor@xxxx> wrote:
> 
> I am down in the valley of the shadow of death for me because I
broke no 
> bolts getting everything off. Some of my bolts were "thin" in the
middle do 
> to rust! I have new bolts, but want to try to solve this issue.
> -Can't use stainless
> -Could slop on copper anti-seze
> -Could coat each bolt with clear silicon as I put them in
> 
> NEXT- I was told to use Silicon grease on the rubber seal on the
intake, 
> only place I have found this on the net is grease watches? Any
retailer have 
> this?
> 
> LAST- How do I KNOW that when I have it all back togeter that I
would not be 
> weeping water, and then sobbing in tears.
> -Is there a way to put pressure on the system and will that work?
> 
> Charles- 16835






To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/