[DML] Penetrating oil, or how to remove really corroded nuts

["Bernie" <bmanderville@xxxxxxxxxxx>]

Hi all, decided to dive in and start tinkering with the car this 
morning.  Immediate problems, all I want to do is replace the 
alternator, and the AC and Altrenator belts.  Well the adjusting bolt 
retaining nut (SP10037) on the lower AC pulley bracket (10072) is stuck 
on there like you would not believe, I have soaked it with penetrating 
oil for over 2 hours and it just will not breakfree, any one got any 
ideas?

Next thing is the alternator, the wires are so corroded to the nut they 
just spin with the nut when I loosen it.  These too have been soaking 
in penetrating oil.  Don't want to cut them off as there is not much 
wire there to begin with.

Any ideas or hints will be most appreciated.

Thanks,

Bernie






To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/