[DML] Re: Cruise control problems

[doctorDHD@xxxxxxx]

Dave,
 
The manufacturer says use 4 magnets on European vehicles.   Usually  what 
they want is 4 magnets on a car with no drive shaft per se, as in our cars  or 
front wheel cars as our "half shafts" spin 3 to 4 times slower than a drive  
shaft do to the fact that it is on the "other side" of the differential. 
 
I would first try to see if there are any calibration or sensitivity  setting 
to adjust.
 
Make sure the cable is coming out straight and not binding.  
 
Add another two magnets and try again. (Hey maybe this should be at the top  
of the list.)
 
D² & 6530


Message:  21        
From: "Dave Sontos"  <dsontos@xxxxxxxxxxx>
Subject: Cruise control problems

I've  gone and installed my cruise control using the pedal pull method with the  module in the trunk. However...

The car will not maintain a constant speed.
The instructions say euorpean  vehicles should use four magnets with the pickup coil but they only supply  two in the kit and that's what I used. Any suggestions?





To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/