[DML] Cruise control problems
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[DML] Cruise control problems
- From: "Dave Sontos" <dsontos@xxxxxxxxxxx>
- Date: Thu, 23 Jun 2005 18:32:26 -0400
I've gone and installed my cruise control using the pedal pull method with
the module in the trunk. However...
The car will not maintain a constant speed. If set for 55 mph it will
accelerate to 57 then decelerate down to 51 then full acceleration to 58
then closed throttle down to 51.
Microcruise IV, vacuum unit
The instructions say euorpean vehicles should use four magnets with the
pickup coil but they only supply two in the kit and that's what I used.
Any suggestions?
Dave Sontos
Vin 02573
To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx
For more info on the list, tech articles, cars for sale see www.dmcnews.com
To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/dmcnews/
<*> To unsubscribe from this group, send an email to:
dmcnews-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Back to the Home of PROJECT VIXEN