[DML] Unidentified Connectors in engine bay

[Jeff Phillips <rvparty@xxxxxxxxx>]

I've created an album for #10544 and put in a few pics.  (Anyone know
why it says I've used 30 M of space when I've only 2 M of photos in
there?)

Please take a look at the picture called Unknown Connector.  Its 2
wires (one is black with a slate stripe) near the Idle Microswitch and
WOT switch.  The go into a black connector but theres nothing there to
connect to.

http://photos.groups.yahoo.com/group/dmcnews/vwp?.dir=/%2310544&.dnm=Unknown+connector.jpg

Another pic is called Ungrounded.  Its a ground wire on the coil
resistor plate that isn't long enough to connect to anythere.  Where
should it go so I can splice a fix in to it.

http://photos.groups.yahoo.com/group/dmcnews/vwp?.dir=/%2310544&.dnm=UnGrounded.jpg

Any advice would be nice.  Finally I posted pics of my fixed
cross-over pipr with a modern flex portion.  The flex piece cost about
$15 from Napa and the labor wasn't bad either.  Much improved over my
original that cracked and was leaking, plus a LOT cheaper thana  new
pipe.

Jeff 
#10544





To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/