Re: [DML] fuel filter and seal?

[elvisnocita@xxxx]

I had the same problem and used a teflon tape and it works perfect.
Don't ask me for a particular type, it's what I fond in my basement...

Elvis

> there since it wasn't a good day, but I went ahead and started on the fuel
> filter.
> It's back in, but I will have to pull it out again because the inlet angle
> adapter leaks. I thought I tightened it in enough, but no....
> So my question is: mega-tighten it down some more? or is there a plumber's
> tape (and particular type is fuel resistant?) I should be using on these
> threads? There is very little to seal this connection.