Re: Need for engine block
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Need for engine block



See message #30811. R30 differs slightly from stock DMC, but
apparently bolted up OK to what I assume is original transmission.
Martin G's PRV man pegged at 2.65 liters. Still scoots pretty well
(once you tune correctly!)

Are R30's available from domestic source? Given rest of my car, hard
to believe original owner shipped one transatlantic.

Have had good luck cross referencing 1985 Volvo 260 -- perhaps you
could find one of those.

Re: AMC Eagles -- only mentioned in much responded post because during
quest to ID my block was suggested by 2 DML'ers as possible source.
Renault did own controlling interest in AMC at this time, but two
product lines never cross engineered (don't go popping hoods of AMC
Eagles hoping to find a suitable doner).

Bill Robertson
#5939

>--- In dmcnews@xxxxxxxxxxxxxxx, "Stefan Latt <stefan_latt@xxxx>"
<stefan_latt@xxxx> wrote:
> Hello,
> 
> Dooes anyone know where I can get an engine block that fits the 
> Delorean? Is it 100% identical to Renault 30? A complete engine could 
> be considered as well. 
> 
> Shipment from Europe is possible. 
> 
> Regards
> 
> Stefan






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated