Re: [DML] Idle speed

[elvisnocita@xxxx]

Check out that the idle speed motor isn't stuck closed.
My one wasn't moving at all as the bearings were seized.

There is a small screw on top of it where (when turned off)you can see at
least a little bit if the
motor can turn or not. I think you should also be able to hear that motor
buzzing 
when working correctly.

I would check this first, and also the idle speed switch. Don't rely on the
clicking sound of that switch - measure if it works !

Elvis


<< Hello List
> Have a problem, need advise.
> My car starts on first try , runs for a few seconds and goes to low idle 
> before it is warm enough to run, it tries to idle at 750 rpm but dies. I
> can 
> restart it afew times, when it is warm enough it will keep running.
> What tells it to stay at high idle until it is warm enough to run?
> >>
> 
> 
> To address comments privately to the moderating team, please address:
> moderators@xxxx
> 
> For more info on the list, tech articles, cars for sale see
> www.dmcnews.com
> 
> To search the archives or view files, log in at
> http://groups.yahoo.com/group/dmcnews 
> 
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ 
> 
> 

-- 
+++ GMX - Mail, Messaging & more http://www.gmx.net +++
NEU: Mit GMX ins Internet. Rund um die Uhr für 1 ct/ Min. surfen!