Re: [DML] Non Starting problem

[dherv10@xxxx]

Phil, Two things to check. 
#1 Is the connection on the top of the idle speed motor good and tight. Is it 
getting power and opening the valve when the throttle is in the rest position.
#2. Since it sounds like it's choking down. Turn the bottom idle screw clock 
to open up the throttle body butterflies a little more and then see what 
happens. 
Be sure to not flood the car by trying to keep on cranking it. If need be, 
unplug the cold start valve and try it again. 
John Hervey
www.specialTauto.com


<< Now that these things have been replaced/repaired. I can't get the
thing to stay running. When you turn the key, It fires up and as soon
as it settles down to idle it dies or if it does run, runs rough and
dies if you step on the throttle. 
>>