Re: Fw: oil pressure
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Fw: oil pressure



Bob - It is more than likely a bad sending unit. I damaged mine 
during an oil filter change, and it "pegs" with the engine running. I 
know that my pressures are correct. There are several replacement 
senders that are advertised as being "more accurate" than the original 
sender. Most vendors have them available. The sending unit for the 
gauge is next to the oil filter. The sending unit for the idiot light 
is on the opposite side, just behind the A/C compressor. If the idiot 
light is functional, it *should* show a real problem if you have one.

Toby Peterson VIN 2248
Winged1

--- In dmcnews@xxxx, Bob wrote:

> I have had my 1981 Delorean since 1999 and have noticed that the oil 
pressure is maxing out past 80psi.! The car has 18000 original miles 
and I have changed the oil regularly. When I first got the car I 
warmed it up then changed the oil. Then I ran it 100 miles and 
changed it again. It seems to be flowing through the engine alright 
but it worries me. Could it just be a bad sensor? Bob
> 







Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated